I don't have any good pictures right now, not any that would really do it any justice at least, (the one on this post is after only 5 coats), but I finished the clear coat on the new guitar. 15 coats of gloss on the body, ten on the paddle (that's end of the neck where the tuners go) and six satin on the neck.
Tomorrow I'll take it off the stand and hang it someplace out of the way for a week or so. At some point I need to check all the frets and see which ones need leveling, crowning, edges rounded off, etc. I also need to oil the fretboards. Those will get about three coats of Teak oil.
At some point I should probably order new pickups for it. Put something better than the ones that came with it, as they're undoubtedly cheap ones. I'm debating drilling a second pickup jack in it as well. Right now the design calls for a selector switch, that lets you pick bass or guitar. I'm debating a dedicated bass jack, which would allow for separate amp setups. You really don't want to run a bass through most guitar amps, as they have a tendency to destroy them. But if I do that, then I have to redesign the volume controls as well. So still just a thought.
No comments:
Post a Comment
No harassment, no attacks, please.
Also, no spammers.